Intermec 6822 6820 Series 80-Column Printer User Manual (for printers purchase - Page 74
Clear Vertical Tabs in Channel, Using Character Sets and User-Defined Functions
View all Intermec 6822 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Chapter 4 - Control Code Definitions Clear Vertical Tabs in Channel Clears all vertical tab stops in the specified channel. This is a variant behavior of the Set Vertical Tabs in Channel function, where the NUL acts as an early terminating character, since this function normally clears the existing tabs before setting any new tabs. Format Decimal 27 98 c 0 Hex 1B 62 c 00 ASCII ESC "b" c NUL Select Vertical Tab Channel Selects a specified vertical tab channel. It sets up the current tabs from that channel. Once this function is performed, all subsequent Perform Vertical Tab commands use the tab stops from the list retrieved from the specified channel. At power on, the printer uses the tabs stored in channel 0. Format Decimal 27 47 c Hex 1B 2F c ASCII ESC "/" c c is the channel number (range: 0 to 7). Using Character Sets and User-Defined Functions You can install different character sets on the printer. In some cases more than one character set may be present at one time, depending on the amount of available font memory. The 6820 reserves 438 K of memory for installing fonts in flash memory. You can install fonts using NPCP or the Printer Configuration Utility. Single-Byte Character Sets Single-byte character sets (SBCS) are supported for MS-DOS, PL/N, and Intermec application compatibility. Nft00000.mod is the default character set (font) for compatibility with the 6820 Nft00437.mod is the IBM/Microsoft compatible character set for Code Page 437. 58 6820 Series 80-Column Printer User Manual