Intermec 6822 6820 Series 80-Column Printer User Manual (for printers purchase - Page 26

Installing the Internal Battery

Page 26 highlights

Chapter 2 - Installing the 6820 Printer Installing the Internal Battery The optional internal battery is primarily for portable printers. The battery can go in some fixed mount printers using a cable and a factory-installed adapter. The printer battery recharges automatically when the printer is connected to an external power source. For most installations, the external power source is passed through the printer to the mobile computer. The printer battery does not provide charge to the computer. Note: Remove the printer battery when storing a printer for more than 2 or 3 days. After storage, reinstall the battery and connect the printer to an external power source for at least 14 hours to recharge the battery. To install the internal battery 1 Unlatch and open the printer mechanism. Battery Battery cable Printer mechanism 2 Lower the battery into the rear of the printer case. Do not fully seat the battery at this time. 3 Attach the battery cable to the battery. 4 Push the battery down and back under the back edge of the case. The battery should snap into place. 5 Close and latch the printer mechanism. 10 6820 Series 80-Column Printer User Manual

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166

Chapter 2 — Installing the 6820 Printer
10
6820 Series 80-Column Printer User Manual
Installing the Internal Battery
The optional internal battery is primarily for portable printers.
The
battery can go in some fixed mount printers using a cable and a
factory-installed adapter.
The printer battery recharges automatically when the printer is
connected to an external power source. For most installations, the
external power source is passed through the printer to the mobile
computer. The printer battery does not provide charge to the
computer.
To install the internal battery
1
Unlatch and open the printer mechanism.
2
Lower the battery into the rear of the printer case.
Do not fully seat the battery at this time.
3
Attach the battery cable to the battery.
4
Push the battery down and back under the back edge of the case.
The battery should snap into place.
5
Close and latch the printer mechanism.
Note
: Remove the printer battery when storing a printer for more
than 2 or 3 days. After storage, reinstall the battery and connect the
printer to an external power source for at least 14 hours to recharge
the battery.
Printer mechanism
Battery cable
Battery