Intermec 6822 6820 Series 80-Column Printer User Manual (for printers purchase - Page 63

Select Double-Strike Mode, Cancel Double-Strike Mode, Select Double-Wide Mode

Page 63 highlights

Chapter 4 - Control Code Definitions Select Double-Strike Mode Enables double-strike printing until it encounters cancel double-strike mode. Factory default disables double-strike. Text is bolded by printing each dot twice, with the second dot slightly below the first dot. This mode is not available in NLQ, but is not canceled when you select NLQ. Note: This function is not supported in DBCS. Format Decimal 27 71 Hex 1B 47 ASCII ESC "G" Cancel Double-Strike Mode Cancels double-strike mode. Note: This function is not supported in DBCS. Format Decimal 27 72 Hex 1B 48 ASCII ESC "H" Select Double-Wide Mode Enables expanded print for the current line only. The mode set previously returns on subsequent lines. However, expanded print can be canceled with cancel expanded print, DC4 or ESC "W" (0), before end of current line, or wrapping of the print buffer. This works with all three pitches (Pica, Elite, Compressed). This mode is also terminated by the execution of a Carriage Return, Line Feed, Form Feed, Vertical Tab or wrapping of the print buffer. Note: This function is not supported in DBCS. 6820 Series 80-Column Printer User Manual 47

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166

Chapter 4 — Control Code Definitions
6820 Series 80-Column Printer User Manual
47
Select Double-Strike Mode
Enables double-strike printing until it encounters cancel
double-strike mode. Factory default disables double-strike. Text is
bolded by printing each dot twice, with the second dot slightly below
the first dot. This mode is not available in NLQ, but is not canceled
when you select NLQ.
Cancel Double-Strike Mode
Cancels double-strike mode.
Select Double-Wide Mode
Enables expanded print for the current line only. The mode set
previously returns on subsequent lines. However, expanded print can
be canceled with cancel expanded print, DC4 or ESC “W” (0), before
end of current line, or wrapping of the print buffer. This works with
all three pitches (Pica, Elite, Compressed).
This mode is also terminated by the execution of a Carriage Return,
Line Feed, Form Feed, Vertical Tab or wrapping of the print buffer.
Note
: This function is not supported in DBCS.
Format
Decimal
Hex
ASCII
27 71
1B 47
ESC “G”
Note:
This function is not supported in DBCS.
Format
Decimal
Hex
ASCII
27 72
1B 48
ESC “H”
Note
: This function is not supported in DBCS.