Intermec 6822 6820 Series 80-Column Printer User Manual (for printers purchase - Page 87
Select Single Density Graphics Mode, Nine-Pin Graphics Modes
View all Intermec 6822 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
Chapter 4 - Control Code Definitions Select Single Density Graphics Mode This is a simple method of printing graphics. The resolution is 60 dots per inch. Each 8-inch line can accommodate 480 columns of graphic dots. A graphic string that exceeds the length of the print line is discarded. For more information on calculating the parameters, n1 and n2, see "Nine-Pin Graphics Modes" on page 72. Format Decimal 27 75 n1 n2 Hex 1B 4B n1 n2 ASCII ESC "K" n1 n2 Select Low-Speed Double Density Graphics Mode If Single Density graphics does not produce high enough density, try this mode. The number of dots per inch is doubled. However, the speed is reduced to half of what it would be with single density. For more information on calculating the parameters, n1 and n2, see "Nine-Pin Graphics Modes" on page 72. This is 8-pin single density graphics. The resolution is now 120 dots per inch. Each 8-inch line can accommodate 960 columns of graphic dots. A graphic string that exceeds the length of the print line is discarded. Format Decimal 27 76 n1 n2 Hex 1B 4C n1 n2 ASCII ESC "L" n1 n2 Select High-Speed Double Density Graphics Mode This 8-pin graphics mode produces the same density as the Low-Speed Double Density mode, however, the speed is doubled. For more information on calculating the parameters, n1 and n2, see "Nine-Pin Graphics Modes" on page 72. Format Decimal 27 89 n1 n2 Hex 1B 59 n1 n2 ASCII ESC "Y" n1 n2 6820 Series 80-Column Printer User Manual 71