Intermec CV41 CV41 Vehicle Mount Computer (Windows Embedded Standard) User Man - Page 108
Troubleshoot Operating the Computer, Problems Reading Bar Codes, Continued
View all Intermec CV41 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 108 highlights
Chapter 7 - Troubleshoot and Maintain the Computer Problems Reading Bar Codes (Continued) Problem Solution When connected to USB, the Make sure that: SR30 or SR61T (Gen II) does not • USB Auto-detect is enabled in Intermec Settings. show up in Intermec Settings. • Enable the HID profile, by scanning one of the following bar codes: SR30 Scanner SR61T (Gen II) Scanner Troubleshoot Operating the Computer Use this section to troubleshoot problems that may prevent you from being able to operate the computer. Problems Operating the Computer Problem Solution You press the Power button and Try the following solutions: nothing happens. • Make sure that power is connected to the computer, and that the Power switch on the smart dock is on. • If your computer is not connected to the smart dock, you may have run out of battery power. The computer appears to be locked up and you cannot enter data. • Disconnect the UPS battery and turn the power back on. For help, see "Disconnect the UPS Battery" on page 99. • Perform a cold boot. For help, see "Restart or Shut Down the Computer" on page 98. • Disconnect the UPS battery. For help, see "Disconnect the UPS Battery" on page 99 • If the computer does not boot or reset, contact your Intermec representative for help. 96 CV41 Vehicle Mount Computer (Windows Embedded Standard) User Manual