Intermec CV41 CV41 Vehicle Mount Computer (Windows Embedded Standard) User Man - Page 63
About Network Communications, Con a/b/g/n (Wi-Fi) Radio Communications
View all Intermec CV41 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
Chapter 4 - Configure the Computer About Network Communications You can easily add the computer to your wireless or wired data collection network. You can connect your computer using: • 802.11a/b/g/n radio communications. • Bluetooth communications. • USB and serial communications. Configure 802.11a/b/g/n (Wi-Fi) Radio Communications Make sure all components with antennas are at least 30 cm (1 ft) apart when power is applied. Failure to comply could result in equipment damage. The computer contains an 802.11 radio to transfer data using wireless communications and to support the TCP/IP network protocols. This section of the manual assumes that your wireless network is set up, including your access points. By default, the 802.11 radio is enabled. If it is disabled, use the following procedure to enable the Wi-Fi radio using Intermec Settings. 1 From the Intermec Settings main menu, tap Communications > 802.11 Radio > Radio Enabled. CV41 Vehicle Mount Computer (Windows Embedded Standard) User Manual 51