Intermec CV41 CV41 Vehicle Mount Computer (Windows Embedded Standard) User Man - Page 18
Attach the CV41 to the Smart Dock, About the Computer
View all Intermec CV41 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Chapter 1 - About the Computer Attach the CV41 to the Smart Dock After you secure the smart dock and connected it to power, you can attach the computer to the smart dock. 1 Press the Power button . The computer turns off. 2 Locate the protruding lip on the rear of the computer. 3 Place the lip of the computer over the top of the dock. 4 Slide the CV41 from side-to-side until the computer is seated into the smart dock. 5 Push down onto the smart dock until you hear click. 6 If necessary, adjust the viewing angle by adjusting the pivot arm on the RAM mount. 6 CV41 Vehicle Mount Computer (Windows Embedded Standard) User Manual
Chapter 1 — About the Computer
6
CV41 Vehicle Mount Computer (Windows Embedded Standard) User Manual
Attach the CV41 to the Smart Dock
After you secure the smart dock and connected it to power, you can
attach the computer to the smart dock.
1
Press the
Power
button . The computer turns off.
2
Locate the protruding lip on the rear of the computer.
3
Place the lip of the computer over the top of the dock.
4
Slide the CV41 from side-to-side until the computer is seated into
the smart dock.
5
Push down onto the smart dock until you hear click.
6
If necessary, adjust the viewing angle by adjusting the pivot arm on
the RAM mount.