Intermec CV41 CV41 Vehicle Mount Computer (Windows Embedded Standard) User Man - Page 74

Con Static WEP Security With Microsoft Security

Get Intermec CV41 PDF manuals and user guides View all Intermec CV41 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 74 highlights

Chapter 4 - Configure the Computer 13 Select a root certificate or load a root certificate of the authentication server on your computer. For help, see "Load a Certificate" on page 69. 14 Tap OK to exit the Properties screen 15 Tap OK again to save the Microsoft Security settings. Configure Static WEP Security With Microsoft Security Use the following procedure to configure static WEP security with Microsoft security. Intermec recommends that you use WPA2-PSK instead of WEP if possible. 1 Make sure the communications and radio parameters on your computer are configured. 2 Tap Start > Network Connections. The Network Connections screen appears. 3 Tap and hold onto the Wireless Network Connection icon until the pop-up screen appears and select Properties. 4 Tap the Wireless Networks tab. 5 Make sure your wireless network you are configuring is selected and tap the Properties button. 6 For Network Authentication, choose Open. 7 For Data Encryption, choose WEP. 8 For Network Key, enter an ASCII key or a hex key that is either 5 bytes or 13 bytes long depending on the capability of the radio. Set a 5-byte value for 64-bit WEP or a 13-byte value for 128-bit WEP. Hex keys must be preceded by 0x and contain 5 or 13 hex pairs. 9 For Confirm Network Key, enter the the ASCII or hex key again. 10 For Network Key Index, select the key you want to use for data transmission or select The key is provided for me automatically. 11 Save your settings. 62 CV41 Vehicle Mount Computer (Windows Embedded Standard) User Manual

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
Chapter 4 — Configure the Computer
62
CV41 Vehicle Mount Computer (Windows Embedded Standard) User Manual
13
Select a root certificate or load a root certificate of the
authentication server on your computer. For help, see
“Load a
Certificate” on page 69
.
14
Tap
OK
to exit the Properties screen
15
Tap
OK
again to save the Microsoft Security settings.
Configure Static WEP Security With Microsoft Security
Use the following procedure to configure static WEP security with
Microsoft security. Intermec recommends that you use WPA2-PSK
instead of WEP if possible.
1
Make sure the communications and radio parameters on your
computer are configured.
2
Tap
Start
> Network Connections
. The Network Connections
screen appears.
3
Tap and hold onto the
Wireless Network Connection
icon until
the pop-up screen appears and select
Properties
.
4
Tap the
Wireless Networks
tab.
5
Make sure your wireless network you are configuring is selected
and tap the
Properties
button.
6
For
Network Authentication
, choose
Open
.
7
For
Data Encryption
, choose
WEP
.
8
For
Network Key
, enter an ASCII key or a hex key that is either 5
bytes or 13 bytes long depending on the capability of the radio.
Set a 5-byte value for 64-bit WEP or a 13-byte value for 128-bit
WEP. Hex keys must be preceded by 0x and contain 5 or 13 hex
pairs.
9
For
Confirm Network Key
, enter the the ASCII or hex key again.
10
For
Network Key Index
, select the key you want to use for data
transmission or select
The key is provided for me automatically
.
11
Save your settings.