Intermec CV41 CV41 Vehicle Mount Computer (Windows Embedded Standard) User Man - Page 97
Tools You Need, Create a Custom Serial Cable, Custom Serial Cable Pinout Specifications
View all Intermec CV41 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
Chapter 6 - Enable Screen Blanking Tools You Need To install the switch , you need the following parts and tools: • Switch • Mounting hardware and tools • Custom serial cable Create a Custom Serial Cable To install the switch , you need to create a custom serial cable with a DB9 connector built to the following specifications outlined below. 5 1 9 6 Custom Serial Cable Pinout Specifications Pin Signal Description 1 Not used 2 Not used 3 Not used 4 Not used 5 Not used 6 Not used 7 RTS Request to send output 8 CTS Clear to send input 9 Not used CV41 Vehicle Mount Computer (Windows Embedded Standard) User Manual 85
Chapter 6 — Enable Screen Blanking
CV41 Vehicle Mount Computer (Windows Embedded Standard) User Manual
85
Tools You Need
To install the switch , you need the following parts and tools:
•
Switch
•
Mounting hardware and tools
•
Custom serial cable
Create a Custom Serial Cable
To install the switch , you need to create a custom serial cable with a
DB9 connector built to the following specifications outlined below.
Custom Serial Cable Pinout Specifications
Pin
Signal
Description
1
Not used
2
Not used
3
Not used
4
Not used
5
Not used
6
Not used
7
RTS
Request to send output
8
CTS
Clear to send input
9
Not used
9
5
6
1