Intermec CV41 CV41 Vehicle Mount Computer (Windows Embedded Standard) User Man - Page 142
Radio Configuration Bar Codes
View all Intermec CV41 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 142 highlights
Appendix C - ScanNGo Wi-Fi Configuration Bar Codes Radio Configuration Bar Codes Use an external scanner to read the following ScanNGo bar codes to enable the 802.11 radio and set the defaults for either Wireless security or Microsoft security. After you scan the bar codes, you will still need to use Intermec Settings or another configuration program to set network-specific settings on your computer and to configure the wireless security. Note: If you are using Microsoft security, you can only use the 1D configuration bar codes. The following ScanNGo bar codes were created using SmartSystems Foundation. For more information on SmartSystems Foundation, see "Manage the Computer Using SmartSystems Foundation" on page 36. 2D Configuration Bar Codes You can configure the computer with a 2D imager. 1 Scan the appropriate bar code from the table and wait for the program to start. 2 Follow any instructions on the device. 2D Imager Radio Configuration Bar Codes When You Want To: Scan This Bar Code • Set all communication settings to defaults (Wi-Fi, WWAN if applicable) • Enable Wi-Fi - set Wireless security to defaults 130 CV41 Vehicle Mount Computer (Windows Embedded Standard) User Manual