Intermec CV41 CV41 Vehicle Mount Computer (Windows Embedded Standard) User Man - Page 29
About the Touch Screen, Calibrate the Screen
View all Intermec CV41 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Chapter 1 - About the Computer About the Touch Screen The computer comes with an 8-inch color touch screen display with a resolution of 800 x 480 pixels. The display also comes with an optional defroster to reduce condensation on the external surface of the display when moving between sub-freezing temperatures and normal temperatures. Protect the Touch Screen Apply the optional touch screen protective film to help protect the screen from minor damage, scratches, and abrasions. Contact your local Intermec representative to order protective film for your touch screen. 1 Clean the touch screen from fingerprints, lint particles, dust, and smudges. For more information, see "Clean the Computer" on page 101. 2 Peel off the backing from the film to expose the adhesive. 3 Slide one edge of the film between the touch screen and display housing. 4 Repeat Step 3 for the other three edges of the touch screen film. Calibrate the Screen You may need to calibrate your screen if you tap on one area and it registers in a different area of the screen. Make sure you use the stylus to complete the alignment process. 1 In the Windows Taskbar, tap the PM icon and select Control Panel. 2 Select PenMount 6000 USB and tap Configure. 3 Tap one of the recalibration methods. 4 Follow the prompts on the screen to complete the alignment process. CV41 Vehicle Mount Computer (Windows Embedded Standard) User Manual 17