Intermec CV41 CV41 Vehicle Mount Computer (Windows Embedded Standard) User Man - Page 78

Con x Security With Wireless Security, Prompt for Credentials

Get Intermec CV41 PDF manuals and user guides View all Intermec CV41 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 78 highlights

Chapter 4 - Configure the Computer 8 For Pre-Shared Key, enter the pre-shared key or passphrase. The pre-shared key must be a value of 32 hex pairs preceded by 0x for a total of 66 characters. The value must match the key value on the access point. The passphrase must be from 8 to 63 characters. After you enter a passphrase, the computer internally converts it to a pre-shared key. This value must match the passphrase on the authenticator. 9 Save your settings. Configure 802.1x Security With Wireless Security Use the following procedure to configure 802.1x-WEP security with Wireless security. Intermec recommends that you use WPA2-802.1x instead of 802.1x-WEP if possible. 1 Make sure the communications and radio parameters on your computer are configured. 2 Make sure Wireless is selected as your security choice. 3 Start Intermec Settings. 4 Choose Communications > 802.11 Radio > Wireless Security. 5 Select the profile you want to configure. 6 For Association, choose Open. 7 For Encryption, choose WEP. 8 For 8021x, choose TTLS, PEAP, or TLS. 9 If you chose TTLS or PEAP: a Enter a User Name. b For Prompt for Credentials, choose Enter credentials now. c Enter a User Password. d For Validate Server Certificate, choose Yes. 10 If you choose TLS: a Load a user and root certificate on your computer. For help, see "Load a Certificate" on page 69. b For Validate Server Certificate, choose Yes. 66 CV41 Vehicle Mount Computer (Windows Embedded Standard) User Manual

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
Chapter 4 — Configure the Computer
66
CV41 Vehicle Mount Computer (Windows Embedded Standard) User Manual
8
For
Pre-Shared Key
, enter the pre-shared key or passphrase.
The pre-shared key must be a value of 32 hex pairs preceded by 0x
for a total of 66 characters. The value must match the key value on
the access point. The passphrase must be from 8 to 63 characters.
After you enter a passphrase, the computer internally converts it to
a pre-shared key. This value must match the passphrase on the
authenticator.
9
Save your settings.
Configure 802.1x Security With Wireless Security
Use the following procedure to configure 802.1x-WEP security with
Wireless security. Intermec recommends that you use WPA2-802.1x
instead of 802.1x-WEP if possible.
1
Make sure the communications and radio parameters on your
computer are configured.
2
Make sure Wireless is selected as your security choice.
3
Start Intermec Settings.
4
Choose
Communications > 802.11 Radio >
Wireless Security
.
5
Select the profile you want to configure.
6
For
Association
, choose
Open
.
7
For
Encryption
, choose
WEP
.
8
For
8021x
, choose
TTLS
,
PEAP
, or
TLS
.
9
If you chose
TTLS
or
PEAP
:
a
Enter a
User Name
.
b
For
Prompt for Credentials
, choose
Enter credentials now
.
c
Enter a
User Password
.
d
For
Validate Server Certificate
, choose
Yes
.
10
If you choose
TLS
:
a
Load a user and root certificate on your computer. For help, see
“Load a Certificate” on page 69
.
b
For
Validate Server Certificate
, choose
Yes
.