Intermec CV41 CV41 Vehicle Mount Computer (Windows Embedded Standard) User Man - Page 80
Use Open No Security Associations with Wireless Security, Encryption, Key 1, Transmit key
View all Intermec CV41 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
Chapter 4 - Configure the Computer 8 For Encryption, choose WEP. 9 Define a value for the keys you want to use. You can define up to four keys (Key 1 through Key 4). Enter an ASCII key or a hex key that is either 5 bytes or 13 bytes long depending on the capability of the radio. Set a 5-byte value for 64-bit WEP or a 13-byte value for 128-bit WEP. Hex keys must be preceded by 0x and contain 5 or 13 hex pairs. 10 For Transmit key, choose the key you want to use for transmitting data. 11 Save your settings. Use Open (No Security) Associations with Wireless Security Use the following procedure to configure your computer for open security using Wireless. 1 Start Intermec Settings. 2 Choose Communications > 802.11 Radio > Wireless Security. 3 Select the active profile you are using. 4 For Association, choose Open. 5 For Encryption, choose None. 6 Tap OK. Your settings are saved. 68 CV41 Vehicle Mount Computer (Windows Embedded Standard) User Manual