Intermec CV41 CV41 Vehicle Mount Computer (Windows Embedded Standard) User Man - Page 99
Screen Blanking on Motion, Screen-on delay after motion stops sec, Enable Screen Blanking
View all Intermec CV41 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
Chapter 6 - Enable Screen Blanking 2 In Screen Blanking on Motion, select the COM port the custom serial cable is connected to. 3 In Screen-on delay after motion stops (sec), enter the amount of time in seconds that you want the display to turn on after the vehicle is stationary. 4 Tap OK. Screen blanking is enabled. CV41 Vehicle Mount Computer (Windows Embedded Standard) User Manual 87
Chapter 6 — Enable Screen Blanking
CV41 Vehicle Mount Computer (Windows Embedded Standard) User Manual
87
2
In
Screen Blanking on Motion
, select the COM port the custom
serial cable is connected to.
3
In
Screen-on delay after motion stops (sec)
, enter the amount of
time in seconds that you want the display to turn on after the
vehicle is stationary.
4
Tap
OK
. Screen blanking is enabled.