Konica Minolta AccurioPress C6085 IC-314 User Guide - Page 100

90 Chapter 7-Managing color c. In the Screening list, select the screening method for the profile. d. In the Calibration list, select the relevant calibration table. Notes: ● Linked is the default setting unless you are creating a G7 profile. ● The Warm up copies and Number of copies options are not available when using the Intelligent Quality Optimizer to measure the chart. 5. Click Print. The color measurement chart is printed and being measured. 6. (Optional) To save the measurement file and load it at a later time, locate a folder, and in the Save in box, type a name for the measurement file and click Save. 7. Click Next. 8. Click Create Profile. Note: This process might take a few minutes. 9. In the Profile Name box, type a new name for the profile, or keep the name that the Profiling Tool automatically created based on the screening method. 10. To define the location for saving the destination profile, select one of the following options: ○ Profile Manager-The profile automatically appears in the Profile Manager area. ○ Other-Saves the profile in a specified location, which you can import later to the Profile Manager area in the Resource Center. 11. Click Save to save the profile. 12. In the message that appears, click OK. 13. Click Finish to close the Profiling Tool. Using the i1 spectrophotometer to measure a color chart and create a profile Requirements: ● The press must already be calibrated. ● The i1 spectrophotometer must be placed on its base and connected to the USB port on the IC-314 print controller.