Konica Minolta AccurioPress C6085 IC-314 User Guide - Page 104
Tools, Profiling Tool, Print and measure chart, Measuring device, Warm up copies, Screening, Calibration, Linked, Number of copies, Print, Start
View all Konica Minolta AccurioPress C6085 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 104 highlights
94 Chapter 7-Managing color 1. From the Tools menu, select Profiling Tool. 2. Select Print and measure chart. 3. Click Next. 4. Perform the following actions: a. In the Measuring device list, select the i1iO as the measuring device to be used to measure the color chart. b. In the Warm up copies box, select the number of copies of the warm-up file that you want to print. c. In the Tray list, select the tray in which the paper stock for which you want to create a profile is loaded. d. In the Screening list, select the screening method for the profile. e. In the Calibration list, select the relevant calibration table. Linked is the default setting (highly recommended). f. In the Number of copies box, select the number of copies of the chart that you want to print. 5. Click Print. A three-page color measurement chart and warm-up file are printed. 6. Place the first page of the chart on the i1iO scanning table and click Start. 7. Perform the following actions to find the coordinates of three points (top left, bottom left, and bottom right) in the color measurement chart: a. Use the visor to position the i1iO scanning table on the color patch marked in red. b. Use the i1 measurement button to confirm the position. The scanning process starts five seconds after the third coordinate is available. 8. Place the second page of the chart on the i1iO scanning table, and click Start. 9. Repeat step 7 on page 94 to measure the second page of the chart. 10. Place the third page of the chart on the i1iO scanning table, and click Start. 11. Repeat steps 7 on page 94 to measure the third page of the chart. 12. In the message that appears, click OK.