Konica Minolta AccurioPress C6085 IC-314 User Guide - Page 131
Cloud Eye validation, FAILED - The measured chart is not by the standard
![]() |
View all Konica Minolta AccurioPress C6085 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 131 highlights
Cloud Eye validation 121 ○ PASSED - The measured chart is by the standard tolerances-This message appears at the top of the report in green. ○ FAILED - The measured chart is not by the standard tolerances-This message appears at the top of the report in red. ● General Information about the Printer type, Media type, Color Wedge, Reference files name, Heidelberg Delta E, and Tolerance standard ● Test categories, dE\dH tolerances, dE\dH measured values, and Pass\Fail results. ● A list of patches showing the CMYK, Index #, L.a.b. reference values, actual measured values, and the dE. Note: if you selected Fogra, there are 72 patches, and i If you selected IDEAlliance there are 84 patches 17. Click Print to print the report. When printing the report, you can choose to save it as a PDF, if required. 18. Click Finish to close the Validation tool. Cloud Eye validation Requirements: ● Before starting this procedure, make sure you have configured the Cloud Eye connection information in the Preference tab. These settings are made once and are used for all connections. If you modify any of the settings, you must restart the IC-314 print controller. ● Make sure that the IQ-501 is attached and ready. ● The Print queue must be ready for printing (not suspended), and the printer must be warmed up. 1. From the Tools menu, select Cloud Eye Validation. The Select a validation flow window appears.
![](/manual_guide/products/konica-minolta-accuriopress-c2070-ic314-user-guide-5ef7a9a/131.png)