Home » Konica Minolta Manuals » Multifunction Devices » Konica Minolta C250i » Manual Viewer

Konica Minolta C250i bizhub C360i/C300i/C250i Security Operations User Manual - Page 50

Changing the administrator password

View all Konica Minolta C250i manuals

Add to My Manuals
Save this manual to your list of manuals

Page 50 highlights

2.13 Changing the administrator password 2 2.13 Changing the administrator password When a log-on to the administrator mode becomes successful, the machine enables the operation of changing the administrator password required for accessing the administrator mode. The administrator password entered for the authentication purpose appears as "*" on the display. NOTICE Manage carefully not to forget the administrator password. In the event of a forgotten it, it is necessary to initialize all the data including the hardware. 2.13.1 Changing the administrator password 0 The control panel and the Web Connection can be used for this setting. 0 For the procedure to access the administrator mode, see page 2-2. 0 Do not leave the machine with the setting screen of administrator mode left shown on the display. If it is absolutely necessary to leave the machine, be sure first to log off from the administrator mode. 1 Call the administrator mode. 2 Tap [Security] - [Administrator Password Setting]. 3 Enter the respective administrator passwords in [Current Administrator Password], [New Administrator Password], and [Re-type New Administrator Password] boxes. 4 Tap [OK]. % If a wrong administrator password is entered, a message that tells that the administrator password does not match appears. Enter the correct administrator password. % If the [Enhanced Security Mode] is set to [ON], entry of a wrong password is counted as unauthorized access. If a wrong administrator password is entered a predetermined number of times (once to three times) or more set by the administrator, the Utility screen appears and the machine is set into an access lock state. To cancel the access lock state, turn off, and then turn on, the main power switch of the machine. If the main power switch is turned off and on, the access lock state is canceled after the lapse of time set for [Release Time Settings]. When the main power switch is turned off, then on again, wait at least 10 seconds to turn it on after turning it off. If there is no wait period between turning the main power switch off, then on again, the machine may not function properly. % If the entered administrator password does not meet the password rules, a message that tells that the entered administrator password cannot be used appears. Enter the correct administrator password. For details of the password rules, see page 1-14. bizhub C360i/C300i/C250i/C036DNi/C030DNi/C025DNi 2-30

Section	Page
Contents	2
1 Security	6
1.1 Introduction	6
1.1.1 Persons using the machine	6
1.1.2 Relation between user and job deletion	7
1.2 Compliance with the ISO15408 Standard	8
1.2.1 Hardware and software	8
1.2.2 Installation of firmware	8
1.2.3 Operating precautions	9
1.2.4 INSTALLATION CHECKLIST	10
1.3 Enhanced security mode	13
1.3.1 Major security functions in operation under ISO15408 certification	13
1.4 Precautions for operation control	13
1.4.1 Roles of the owner of the machine	13
1.4.2 Roles and requirements of the administrator	14
1.4.3 Password usage requirements	14
1.4.4 External authentication server control requirements	14
1.4.5 Security function operation setting operating requirements	15
1.4.6 Operation and control of the machine	15
1.4.7 Machine maintenance control	17
1.4.8 Precautions for using the printer driver	17
1.5 Miscellaneous	18
1.5.1 Password rules	18
1.5.2 Precautions for use of various types of applications	18
1.5.3 Encrypting communications	19
1.5.4 Print functions	19
IPP printing	19
1.5.5 FAX functions	19
1.5.6 USB keyboard	19
1.5.7 Different types of boxes	19
1.5.8 Terminating a session and logging out	20
1.5.9 Authentication error during external server authentication	20
1.5.10 Finding the version information	20
2 Administrator Operations	22
2.1 Accessing the administrator mode	22
2.1.1 Accessing the administrator mode	22
2.1.2 Accessing the user mode	27
2.1.3 Checking the number of wrong entries in authentication	29
Conditions to clear the number of times of check	29
2.2 Enhancing the security function	30
2.2.1 Items cleared by format	32
2.2.2 Setting the Enhanced Security Mode	33
2.3 Setting the password rules	34
2.3.1 Setting the password rules	34
2.4 Setting IPsec	35
2.4.1 IPsec setting	35
2.5 Firmware verification function at the time of starting the machine	37
2.5.1 Setting the firmware verification function	37
2.5.2 Self-test function	37
2.6 Preventing unauthorized access	38
2.6.1 Setting Prohibited Functions	38
2.7 Canceling the operation prohibited state	39
2.7.1 Performing release setting	39
2.8 Setting the authentication method	40
2.8.1 Setting the authentication method	40
2.8.2 Setting the external server	41
2.9 ID & Print setting function	42
2.9.1 Setting ID & Print	42
2.10 System auto reset function	43
2.10.1 Setting the system auto reset function	43
2.11 User setting function	44
2.11.1 Making user setting	44
2.12 User box function	46
2.12.1 Setting user box usage restriction	46
2.12.2 Setting the user box	47
2.12.3 Changing the user attributes and box password	48
2.12.4 Setting Memory RX	49
2.12.5 Batch deleting the documents in the Memory RX User Box	49
2.13 Changing the administrator password	50
2.13.1 Changing the administrator password	50
2.14 Obtaining job log	51
2.14.1 Obtaining and deleting a job log	51
2.14.2 Job log data	53
2.15 Setting time/date in machine	80
2.15.1 Setting time/date	80
2.15.2 Setting daylight saving time	80
2.16 TCP/IP setting function	81
2.16.1 Setting the IP Address	81
2.16.2 Registering the DNS server	81
2.17 E-mail setting function	82
2.17.1 Setting the SMTP server (E-mail server)	82
2.18 SMB setting function	83
2.18.1 Setting a client	83
2.19 WebDAV setting function	84
2.19.1 Setting a client	84
2.20 Automatic logoff setting function	85
2.20.1 Setting automatic logoff	85
2.21 Setting for the IPsec communication certificate	86
2.21.1 Introducing the device certificate for IPsec communication	86
2.21.2 Deleting the IPsec communication device certificate	86
2.21.3 Introducing the CA (certification authority) certificate for IPsec communication	87
2.22 FIPS mode setting function	88
2.22.1 Setting the FIPS mode	88
2.23 Firmware update function	89
2.23.1 Updating the firmware	89
2.24 Job deletion setting function	90
2.24.1 Setting the job deletion	90
3 User Operations	92
3.1 User authentication function	92
3.1.1 Performing user authentication	92
3.1.2 Accessing the ID & Print document	95
3.1.3 Number of wrong entries in authentication	95
Conditions to clear the number of times of check	95
3.2 Change password function	96
3.2.1 Performing change password	96
3.3 User box function	97
3.3.1 Setting the user box	97
3.3.2 Changing the user attributes and box password	98
3.3.3 Accessing the user box and user box file	99
3.3.4 Number of wrong entries in entering the box password	100
Conditions to clear the number of times of check	100
Appendix	102
1. Installation of the machine and steps to be performed before operation	103
1.1 Unpacking and setting up the machine	103
1.1.1 Installation and setup of the machine	103
2. FAX function	104
2.1 Installing/setting procedure of the FAX kit	104
2.1.1 Install procedure	104
2.1.2 Routing of the modular cable	104
2.1.3 Affixing the labels	105
2.1.4 Configuration procedures	105

Match case Limit results 1 per page

bizhub C360i/C300i/C250i/C036DNi/C030DNi/C025DNi

2-30

2.13

Changing the administrator password

2.13

Changing the administrator password

When a log-on to the administrator mode becomes successful, the machine enables the operation of chang-

ing the administrator password required for accessing the administrator mode.

The administrator password entered for the authentication purpose appears as "*" on the display.

NOTICE

Manage carefully not to forget the administrator password. In the event of a forgotten it, it is necessary to in-

itialize all the data including the hardware.

2.13.1

Changing the administrator password

The control panel and the

Web Connection

can be used for this setting.

For the procedure to access the administrator mode, see page 2-2.

Do not leave the machine with the setting screen of administrator mode left shown on the display. If it

is absolutely necessary to leave the machine, be sure first to log off from the administrator mode.

Call the administrator mode.

Tap [Security] - [Administrator Password Setting].

Enter the respective administrator passwords in [Current Administrator Password], [New Administrator

Password], and [Re-type New Administrator Password] boxes.

Tap [OK].

If a wrong administrator password is entered, a message that tells that the administrator password

does not match appears. Enter the correct administrator password.

If the [Enhanced Security Mode] is set to [ON], entry of a wrong password is counted as unautho-

rized access. If a wrong administrator password is entered a predetermined number of times (once

to three times) or more set by the administrator, the Utility screen appears and the machine is set

into an access lock state.

To cancel the access lock state, turn off, and then turn on, the

main power switch

of the machine.

If the

main power switch

is turned off and on, the access lock state is canceled after the lapse of

time set for [Release Time Settings]. When the

main power switch

is turned off, then on again, wait

at least 10 seconds to turn it on after turning it off. If there is no wait period between turning the

main power switch

off, then on again, the machine may not function properly.

If the entered administrator password does not meet the password rules, a message that tells that

the entered administrator password cannot be used appears. Enter the correct administrator pass-

word. For details of the password rules, see page 1-14.