Konica Minolta bizhub C654 bizhub C654/C754 Print Operations User Guide - Page 200
Check that [Paper Tray:] of [Paper Tray / Output Tray] is set to [Bypass Tray] and that the [Paper Type:]
View all Konica Minolta bizhub C654 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 200 highlights
3.4 Printing options 3 % [Page Size] (Paper Size): Specify the width and length as desired. Specify the paper size within the allowable range of the banner size (Width:8-1/4 to 11-11/16 inches (210 mm to 297 mm), Length: 18 to 47-1/4 inches(457.3 mm to 1,200 mm)). % [Printer Margins]: Specify the top, bottom, right, and left margins of the paper. 8 Click [OK] (Mac OS X 10.4/10.5/10.6) or [Save] (Mac OS X 10.2/10.3). The custom paper size is then registered. 9 In [Paper Size] in [Page Attributes], select the registered paper size. % In Mac OS X 10.5/10.6, you can also select the paper size from [Paper Size:] in the Print window. 10 To display the Print window, click [Print] in the [File] menu. 11 Check to see that the custom paper size (registered in Step 8) is shown in the [Destination Paper Size] of [Paper Handling]. 12 Check that [Paper Tray:] of [Paper Tray / Output Tray] is set to [Bypass Tray] and that the [Paper Type:] is set to the desired paper type ([Thick 1+]/[Thick 2]/[Thick 3]), and also they are grayed out to prevent them from being changed. % If the [Paper Type:] is not set to [Thick 1+]/[Thick 2]/[Thick 3], set the paper type in [Paper Settings for Each Tray...]. % If the specified paper size is not in the allowable range of the banner size, [Paper Tray:] or [Paper Type:] is not grayed out to enable you to change them. In this case, check the setting of the custom paper size. 13 Execute printing. A message appears on the Touch Panel to prompt you to load papers. 14 Load the banner paper into the Bypass Tray. % For information on how to load banner paper into the Bypass Tray, refer to [User's Guide: Introduction (Trademark Licenses)]. bizhub C754/C654 3-55