Konica Minolta bizhub C654 bizhub C654/C754 Print Operations User Guide - Page 212

3.5 Setting items in the printer driver 3 Settings [Image Shift] [Chapters] [Staple:] [Punch:] [Fold & Staple:] [Page Fold Setting] [Paper Arrangement:] Description Select this check box to fine tune (shift) the print position of the image with respect to the paper. Selecting the [Image Shift] check box displays the [Image Shift] window. Specify the print position in detail. • [Front Side]: Specify the upward/downward and rightward/leftward shift distances for the front side. • [Back Side]: When you print on both sides, specify the upward/down- ward and rightward/leftward shift distances for the back side. Selecting the [Same value for Front and Back sides] check box applies the same settings to both sides. When you have selected [2-Sided] or [Booklet] in [Print Type:], select this check box if you want to print particular pages on the front side. In [Page Number] in the [Chapters] window that appears when this check box is selected, specify the page numbers of the pages you want to print on the front side. To specify multiple page numbers, separate each number with a comma (for example, "2,4,6") or connect the numbers using a hyphen (for example, "6-10"). Select this check box to staple the printed sheets. In addition, specify the number and positions of staples. Select this check box to make punch holes (binder holes) in the printed sheets. In addition, specify the number and positions of punch holes. When folding the printed sheets, select the folding mode. When you have selected [Half-Fold(By Sheet)] or [Tri-Fold(By Sheet)] in [Fold & Staple:], specify the number of pages to be folded at one time. Select whether to adjust the binding position on two-sided printed sheets collectively after all data items are received or sequentially each time a data item is received. • [Prioritize Arranging Papers]: Paper arrangement is performed once af- ter all data items are received. All pages are adjusted under the same conditions. • [Prioritize Productivity]: Paper arrangement is performed sequentially while printing the pages. Tips - To use [Staple:], the optional Finisher is required. - To use [Punch:], the optional Finisher and Punch Kit are required. - The number of punched holes varies depending on the country you are in. - To use Center Staple & Fold, Half-Fold, or Tri-Fold of [Fold & Staple:], the optional Finisher and Saddle Kit are required. - To use Z-Fold of [Fold & Staple:], the optional Finisher and Z-Fold Unit are required. - To use Z-Fold of [Fold & Staple:], specify the paper size described at the setting you selected from the drop-down list ([Z-Fold (A3, B4, 11 e 17, 8K)], [Z-Fold (8 1/2 e 14)] at "Paper Size" of the application software or printer driver. bizhub C754/C654 3-67