Lantronix PremierWave XC PremierWave XC - User Guide - Page 38
To Con Network 1 Link Settings, Using Web Manager, Using the CLI, Using XML
View all Lantronix PremierWave XC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
6:Network Settings To Configure Network 1 Link Settings Using Web Manager To modify Ethernet (eth0) Link information, click Network on the menu and select Network 1 -> Link. Using the CLI To enter the eth0 Link command level: enable -> config -> if 1 -> link Using XML Include in your file: Network 2 Interface Status To View Network 2 Interface Status On the Network 2 Interface Status page, you can view the GSM/GPRS status of the device. To view the Network 2 (wwan0) Status page, click Network on the menu bar and select Network 2 -> Status. Network 2 SMS Outbound Settings The table below shows the settings for SMS Outbound messages and to send a test message. Table 6-5 Network 2 (wwan0) SMS Outbound Settings Network 2 (wwan0) Description SMS Outbound Settings SMS Outbound Message Center No. Select the appropriate SMS format. Note: Select the Text ASCII when sending SMS in Text format (7 bit characters and typically limited to 160 characters per message.) Select Binary to send SMS in Binary format. (8 bit characters and typically limited to 140 characters per message.) Select Unicode to send SMS in Unicode format. (16 bit characters and typically limited to 70 characters per message.) Input the SMS center Number. Note: This field is required only if the SMS center is incorrect. Channel Select the appropriate Channel to send SMS. Note: The default network setting for transmission of SMS messaging is GSM. However, there are carriers that support sending of SMS messages over their GPRS network. Check with your provider. PremierWave XC User Guide 38