Lantronix PremierWave XC PremierWave XC - User Guide - Page 41
To Con Network 2 Roam Settings, Using Web Manager, Using the CLI, Using XML
View all Lantronix PremierWave XC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
6:Network Settings To Configure Network 2 Roam Settings Using Web Manager To modify Network 2 GSM/GPRS band settings, click Network on the menu bar and select Network 2 → Configuration → Roam Using the CLI To enter the Network 2 GSM/GPRS command level: enable -> config -> if 2 ->link -> roam Using XML Include in your file: Network 2 GSM/GPRS Bands Settings The table below shows the settings for GSM/GPRS Bands settings. Table 6-8 Network 2 (wwan0) GSM/GPRS Bands Settings Network 2 (wwan0) GSM/GPRS Settings Description GSM/GPRS Bands Select the GSM/GPRS Bands if needed: Auto (Default) GSM-900 GSM-1800 GSM-850 GSM-1900 Note: These bands are the wwan0 frequencies designated by the ITU for the operation of GSM mobile phones. Typically Auto should suffice in most cases and should not be changed unless the unit is unable to determine the specific band used by your provider. GSM bands 900 & 1800 are used in most parts of the world, with the exception of places such as USA, Brazil and Canada where GSM bands 850 & 1900 are used. Changes do not take effect until after reboot. To Configure Network 2 GSM/GPRS bands Settings Using Web Manager To modify Network 2 GSM/GPRS band settings, click Network on the menu bar and select Network 2 → Configuration → GSM/GPRS Band Using the CLI To enter the Network 2 GSM/GPRS command level: enable -> config -> if 2 ->link -> gsm gprs band PremierWave XC User Guide 41