Lantronix PremierWave XC PremierWave XC - User Guide - Page 56
Modem Emulation, Tunnel Modem Emulation, Settings, Description
View all Lantronix PremierWave XC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
7:Line and Tunnel Settings Modem Emulation Some older equipment is designed to attach to a serial port and dial into a network with a modem. This equipment uses AT commands to control the connection. For compatibility with these older devices on modern networks, our product mimics the behavior of the modem. Table 7-8 Tunnel Modem Emulation Settings Tunnel Modem Emulation Description Settings Echo Pluses Set whether the pluses will be echoed back during a "pause +++ pause" escape sequence on the Serial Line. Choices are: Enabled Disabled (default) Echo Commands Set whether characters read on the Serial Line will be echoed, while the Line is in Modem Command Mode. Choices are: Enabled Disabled (default) Verbose Response Set whether Modem Response Codes are sent out on the Serial Line. Choices are: Enabled Disabled (default) Response Type Select a representation for the Modem Response Codes sent out on the Serial Line. Choices are: Text (ATV1) (default) Numeric (ATV0) Error Unknown Commands Set whether the Error Unknown Commands is enabled (ATU0) and ERROR is returned on the Serial Line for unrecognized AT commands. Otherwise (ATU1) OK is returned for unrecognized AT commands. Choices are: Enabled Disabled (default) Incoming Connection Set how and if requests are answered after an incoming RING (ATS0=2). Choices are: Disabled (default) Automatic Manual Connect String Enter the customized Connect String sent to the Serial Line with the Connect Modem Response Code. Display Remote IP Set whether the Display Remote IP is enabled so that the incoming RING sent on the Serial Line is followed by the IP address of the caller. Choices are: Enabled Disabled (default) PremierWave XC User Guide 56