Lenovo NetVista Hardware Maintenance Manual for NetVista 6018, 6058, 6059, 626 - Page 102
Message/Symptom
View all Lenovo NetVista manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 102 highlights
Message/Symptom Computer will not Wake On LAN (if applicable) Dead computer. See "Power supply" on page 30. Diskette drive in-use light remains on or does not light when drive is active. Flashing cursor with an otherwise blank display. Incorrect memory size during POST ″Insert a Diskette″ icon appears with a known-good diagnostics diskette in the first 3.5-inch diskette drive. Intensity or color varies from left to right of characters and color bars No power or fan not running FRU/Action 1. Check power supply and signal cable connections to network adapter 2. Ensure that the operating system settings are set to enable Wake on LAN 3. Ensure Wake On LAN feature is enabled in Setup/Configuration (see "Setup Utility program" on page 41) 4. Ensure network administrator is using correct MAC address 5. Ensure no interrupt or I/O address conflicts 6. Network adapter (advise network administrator of new MAC address) 1. Power Supply 2. System Board 3. Riser card 1. Diskette Drive 2. System Board 3. Diskette Drive Cable 4. Riser card 1. System Board 2. Primary Hard Disk Drive 3. Hard Disk Drive Cable 4. Riser card 1. Run the Memory tests 2. Memory Module 3. System Board 1. System Board 2. Diskette Drive Cable 3. Riser card 4. Network Adapter 1. Display 2. System Board 1. See "Power supply" on page 30 88 Hardware Maintenance Manual: IBM NetVista Computer Types 6058, 6059, 6269, 6568, 6569, 6578, 6579, 6648, 6649