Lenovo NetVista Hardware Maintenance Manual for NetVista 6018, 6058, 6059, 626 - Page 24
Press F3 to review the log file, Reboot the system
View all Lenovo NetVista manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Diagnostic Error Code FRU/Action 015-015-XXXUSB port External Loopback failure 1. Remove USB device(s) and re-test 2. System board 015-027-XXXUSB port Configuration/Setup error 1. Flash the system 2. System board 015-032-XXXUSB port Device Controller failure 1. System board 015-034-XXXUSB port bufferallocation failure 1. Reboot the system 2. Flash the system 3. Run memory test 4. System board 015-035-XXXUSB port Reset condition detected 1. Remove USB device(s) and re-test 2. System board 015-036-XXXUSB port Register error 1. System board 015-040-XXXUSB port IRQ failure 1. Run setup and check for conflicts 2. Flash the system 3. System board 015-195-XXXUSB port Test aborted by user 1. Information 2. Re-start the test, if necessary 015-196-XXXUSB port test halt, error threshold 1. Press F3 to review the log file exceeded 2. Re-start the test to reset the log file 015-197-XXXUSB port test warning 1. Make sure the component that is called out is connected and/or enabled 2. Re-run test 3. Component that is called out in warning statement 4. Component under test 015-198-XXXUSB port test aborted 1. If a component is called out, make sure it is connected and/or enabled 2. Flash the system and re-test 3. Go to the ″Undetermined problems″ section 015-199-XXXUSB port test failed, cause unknown 1. Go to the ″Undetermined problems″ section 2. Flash the system and re-test 3. Replace component under function test 018-000-XXXPCI Card Test Passed 1. No action 10 Hardware Maintenance Manual: IBM NetVista Computer Types 6058, 6059, 6269, 6568, 6569, 6578, 6579, 6648, 6649