Lenovo NetVista Hardware Maintenance Manual for NetVista 6018, 6058, 6059, 626 - Page 51
Alert-On LAN™ test, Asset ID™ test, Test results, Asset ID
View all Lenovo NetVista manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Follow the steps below to locate the IBM PC Enhanced Memory Diagnostics test options. 1. Select the DIAGNOSTICS option on the toolbar and press Enter. 2. Highlight either the Memory Test-Full or Memory Test-Quick option and press Enter. 3. Memory Test-Full The full memory test will take about 80 seconds per MB of memory and will detect marginal, intermittent, and solid (stuck) memory failures. 4. Memory Test-Quick The quick memory test will take about 20 seconds per MB of memory and will detect solid (stuck) memory failures only. Notes Either level of memory testing can be performed on all memory or a single SIMM or DIMM socket. Only sockets containing a SIMM or DIMM can be selected for testing. Unpopulated sockets are noted by ........ beside the test description. Alert-On LAN™ test The Alert On LAN test does the following: v Determines if Alert On LAN is supported on the system. v Checks the revision ID register. v Verifies the EEPROM checksum. v Validates that a software alert can be sent. Asset ID™ test The Asset ID test does the following: v Determines if Asset ID is supported on the system. v Verifies the EEPROM areas. v Performs an antenna detection test. Test results IBM PC Enhanced Diagnostic test results will produce the following error code format: Function Code Failure Type DeviceID Date ChkDigits Text v Function Code: Represents the feature or function within the PC. v Failure Type: Chapter 2. Types 6568/6569/6648/6649 37