Lenovo NetVista Hardware Maintenance Manual for NetVista 6018, 6058, 6059, 626 - Page 166
No-beep symptoms, Start Options
View all Lenovo NetVista manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 166 highlights
Beep Symptom 3-1-XDMA register failed 3-2-4Keyboard controller failed 3-3-4Screen initialization failed 3-4-1Screen retrace test detected an error 3-4-2POST is searching for video ROM 4 All other beep code sequences One long and one short beep during POST.Base 640 KB memory error or shadow RAM error One long beep and two or three short beeps during POST.(Video error) Three short beeps during POST Continuous beep Repeating short beeps FRU/Action 1. System Board 1. System Board 2. Keyboard 1. Video Adapter (if installed) 2. System Board Display 1. Video Adapter (if installed) 2. System Board 3. Display 1. Video Adapter (if installed) 2. System Board 1. Video Adapter (if installed) 2. System Board 1. System Board 1. Memory Module 2. System Board 1. Video Adapter (if installed) 2. System Board 1. See "System board memory" on page 135 2. System Board 1. System Board 1. Keyboard stuck key? 2. Keyboard Cable 3. System Board No-beep symptoms Note: Types 6058/6059/6269/6578/6579 computers default to come up quiet (no beep and no memory count and checkpoint code display) when no errors are detected by POST. To enable beep and memory count and checkpoint code display when a successful POST occurs, do the following: 1. Select Start Options in the Configuration/Setup Utility program (see "Setup Utility program" on page 122). 152 Hardware Maintenance Manual: IBM NetVista Computer Types 6058, 6059, 6269, 6568, 6569, 6578, 6579, 6648, 6649