Lenovo NetVista Hardware Maintenance Manual for NetVista 6018, 6058, 6059, 626 - Page 31
Flash system
View all Lenovo NetVista manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Diagnostic Error Code 086-198-XXXMouse Port interface test aborted 086-199-XXXMouse Port interface test failed, cause unknown 089-000-XXXMicroprocessor Test Passed 089-XXX-XXXMicroprocessor failure 089-195-XXXMicroprocessor Test aborted by user 089-196-XXXMicroprocessor test halt, error threshold exceeded 089-197-XXXMicroprocessor test warning 089-198-XXXMicroprocessor test aborted 089-199-XXXMicroprocessor test failed, cause unknown 170-000-XXXVoltage Sensor(s) Test Passed 170-0XX-XXXVoltage Sensor(s) failure 170-195-XXXVoltage Sensor(s) Test aborted by user 170-196-XXXVoltage Sensor(s) test halt, error threshold exceeded FRU/Action 1. If a component is called out, make sure it is connected and/or enabled 2. Flash the system and re-test 3. Go to the ″Undetermined problems″ section 1. Go to the ″Undetermined problems″ section 2. Flash the system and re-test 3. Replace component under function test 1. No action 1. Microprocessor(s) 2. System board 1. Information 2. Re-start the test, if necessary 1. Press F3 to review the log file 2. Re-start the test to reset the log file 1. Make sure the component that is called out is connected and/or enabled 2. Re-run test 3. Component that is called out in warning statement 4. Component under test 1. Flash the system and re-test 2. Go to the ″Undetermined problems″ section 1. If a component is called out, make sure it is connected and/or enabled 2. Go to the ″Undetermined problems″ section 3. Flash the system and re-test 4. Replace component under function test 1. No action 1. Flash system 2. System board 1. Information 2. Re-start the test, if necessary 1. Press F3 to review the log file 2. Re-start the test to reset the log file Chapter 1. IBM PC Enhanced Diagnostics error codes 17