Lenovo NetVista Hardware Maintenance Manual for NetVista 6018, 6058, 6059, 626 - Page 172
Run Configuration. See, Serial Device Cable
View all Lenovo NetVista manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 172 highlights
POST Error Code 1107 1110Register test failed 1116Interrupt error 1117Failed baud rate test 1162 Serial port configuration error 11XXNot listed above 1201 1202, 1206, 1208, 1209, 12XX 1207 13XX 1402Printer not ready 1403No paper error, or interrupt failure 1404System board timeout failure 1405Parallel adapter error 1406Presence test error 14XXNot listed above. Check printer before replacing system board 15XX 1692Boot sequence error 16XX 1762Hard disk drive configuration error FRU/Action 1. Serial Device Cable 2. System Board 1. Run Enhanced Diagnostics 2. System Board 1. Run Enhanced Diagnostics 1. Run Enhanced Diagnostics 1. Run Configuration 2. Serial Adapter (if installed) 3. System Board 1. System Board 1. System Board 2. Any Serial Device 1. Dual Async Adapter/A 2. System Board 3. Any Serial Device 1. Communications Cable 2. Dual Async Adapter/A 1. Game Adapter Information only Information only 1. Run Enhanced Diagnostics 1. Run Enhanced Diagnostics 1. Run Enhanced Diagnostics 1. Printer 2. System Board 1. SDLC Adapter 1. Run FDISK to ensure at least one active partition is set active 1. 36/38 Workstation Adapter 1. Run Configuration. (See "Setup Utility program" on page 122.) 158 Hardware Maintenance Manual: IBM NetVista Computer Types 6058, 6059, 6269, 6568, 6569, 6578, 6579, 6648, 6649