Lenovo NetVista Hardware Maintenance Manual for NetVista 6018, 6058, 6059, 626 - Page 25
connected and/or enabled, No action
View all Lenovo NetVista manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Diagnostic Error Code FRU/Action 018-0XX-XXXPCI Card Failure 1. Riser card, if installed 2. System board 018-195-XXXPCI Card Test aborted by user 1. PCI card 2. Information 3. Re-start the test, if necessary 018-196-XXXPCI Card test halt, error threshold 1. Press F3 to review the log file exceeded 2. Re-start the test to reset the log file 018-197-XXXPCI Card test warning 1. Make sure the component that is called out is connected and/or enabled 2. Re-run test 3. Component that is called out in warning statement 4. Component under test 018-198-XXXPCI Card test aborted 1. Make sure the component that is called out is connected and/or enabled 2. Flash the system and re-test 3. Go to the ″Undetermined problems″ section 018-199-XXXPCI Card test failed, cause unknown 1. Go to the ″Undetermined problems″ section 2. Flash the system and re-test 3. Replace component under function test 018-250-XXXPCI Card Services error 1. PCI card 2. Riser card, if installed 3. System board 020-000-XXXPCI Interface Test Passed 1. No action 020-0XX-XXXPCI Interface error 1. PCI card 2. Riser card, if installed 3. System board 020-195-XXXPCI Test aborted by user 1. Information 2. Re-start the test, if necessary 020-196-XXXPCI test halt, error threshold exceeded 1. Press F3 to review the log file 2. Re-start the test to reset the log file Chapter 1. IBM PC Enhanced Diagnostics error codes 11