Lenovo NetVista Hardware Maintenance Manual for NetVista 6018, 6058, 6059, 626 - Page 28
RAID signal cable
View all Lenovo NetVista manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Diagnostic Error Code 030-197-XXXSCSI interface test warning 030-198-XXXSCSI interface test aborted 030-199-XXXSCSI interface test failed, cause unknown 035-000-XXXRAID interface Test Passed 035-0XX-XXXRAID interface Failure 035-195-XXXRAID interface Test aborted by user 035-196-XXXRAID interface test halt, error threshold exceeded 035-197-XXXRAID interface test warning 035-198-XXXRAID interface test aborted 035-199-XXXRAID interface test failed, cause unknown 071-000-XXXAudio port Interface Test Passed FRU/Action 1. Make sure the component that is called out is connected and/or enabled 2. Re-run test 3. Component that is called out in warning statement 4. Component under test 1. If a component is called out, make sure it is connected and/or enabled 2. Flash the system and re-test 3. Go to the ″Undetermined problems″ section 1. Go to the ″Undetermined problems″ section 2. Flash the system and re-test 3. Replace component under function test 1. No action 1. RAID signal cable 2. RAID device 3. RAID adapter card, if installed 4. System board 1. Information 2. Re-start the test, if necessary 1. Press F3 to review the log file 2. Re-start the test to reset the log file 1. Make sure the component that is called out is connected and/or enabled 2. Re-run test 3. Component that is called out in warning statement 4. Component under test 1. If a component is called out, make sure it is connected and/or enabled 2. Flash the system and re-test 3. Go to the ″Undetermined problems″ section 1. Go to the ″Undetermined problems″ section 2. Flash the system and re-test 3. Replace component under function test 1. No action 14 Hardware Maintenance Manual: IBM NetVista Computer Types 6058, 6059, 6269, 6568, 6569, 6578, 6579, 6648, 6649