Lenovo NetVista Hardware Maintenance Manual for NetVista 6018, 6058, 6059, 626 - Page 179

SCSI Hard Disk Drive, Tape Cassette

Page 179 highlights

POST Error Code FRU/Action 20104 1. Memory Module DRAM, VRAM 2. Printer/Scanner Option 3. Image Adapter/A 20105 to 20110 1. Printer/Scanner Option 2. Image Adapter/A 3. Memory Module DRAM, VRAM Image Adapter/A Memory Test failure indicated 1. Replace memory module (shown in graphic) by graphic of adapter 206XX 1. SCSI-2 Adapter 2. Any SCSI Device 3. System Board 208XXVerify there are no duplicate SCSI ID settings on the same bus. 1. Any SCSI Device 210XXXXInternal bus, size unknown210XXX1External bus, size unknown 1. SCSI Hard Disk Drive 2. SCSI Adapter or System Board 3. SCSI Cable 4. SCSI ID Switch (on some models) Tape Drive amber LED remains on 1. Tape Drive 2. SCSI Cable (internal) 3. SCSI Adapter or System Board Tape Drive green ″in use″ LED fails to come on 1. Tape Drive 2. SCSI Adapter or System Board 3. SCSI Cable (internal) 4. SCSI Cable (external) Tape automatically ejected from drive 1. Tape Cassette Drive SCSI ID on rotary switch does not match SCSI ID set in configuration. Verify drive switches inside cover are set to zero 1. Rotary Switch Circuit Board 2. Circuit Board Cable 3. Tape Drive Tape sticks or breaks in drive. Verify that the tapes 1. Tape Cassette used meet ANSI standard X3B5 212XX 1. SCSI Printer 2. Printer Cable 213XX 1. SCSI Processor Chapter 3. Types 6058/6059/6269/6578/6579 165

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238
  • 239
  • 240
  • 241
  • 242
  • 243
  • 244
  • 245
  • 246
  • 247
  • 248

POST Error Code
FRU/Action
20104
1.
Memory Module DRAM, VRAM
2.
Printer/Scanner Option
3.
Image Adapter/A
20105 to 20110
1.
Printer/Scanner Option
2.
Image Adapter/A
3.
Memory Module DRAM, VRAM
Image Adapter/A Memory Test failure indicated
by graphic of adapter
1.
Replace memory module (shown in graphic)
206XX
1.
SCSI-2 Adapter
2.
Any SCSI Device
3.
System Board
208XX
Verify there are no duplicate SCSI ID
settings on the same bus.
1.
Any SCSI Device
210XXXX
Internal bus, size
unknown
210XXX1
External bus, size unknown
1.
SCSI Hard Disk Drive
2.
SCSI Adapter or System Board
3.
SCSI Cable
4.
SCSI ID Switch (on some models)
Tape Drive amber LED remains on
1.
Tape Drive
2.
SCSI Cable (internal)
3.
SCSI Adapter or System Board
Tape Drive green
in use
LED fails to come on
1.
Tape Drive
2.
SCSI Adapter or System Board
3.
SCSI Cable (internal)
4.
SCSI Cable (external)
Tape automatically ejected from drive
1.
Tape Cassette
Drive
SCSI ID on rotary switch does not match SCSI ID
set in configuration. Verify drive switches inside
cover are set to zero
1.
Rotary Switch Circuit Board
2.
Circuit Board Cable
3.
Tape Drive
Tape sticks or breaks in drive. Verify that the tapes
used meet ANSI standard X3B5
1.
Tape Cassette
212XX
1.
SCSI Printer
2.
Printer Cable
213XX
1.
SCSI Processor
Chapter 3. Types 6058/6059/6269/6578/6579
165