Lenovo NetVista Hardware Maintenance Manual for NetVista 6018, 6058, 6059, 626 - Page 21
Diskette drive Cable, Press F3 to review the log file
View all Lenovo NetVista manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Diagnostic Error Code FRU/Action 005-199-XXXVideo test failed, cause unknown 1. Go to the ″Undetermined problems″ section 2. Flash the system and re-test 3. Replace component under function test 005-2XX-XXX 005-3XX-XXXVideo subsystem error 1. Video card, if installed 2. System board 006-000-XXXDiskette interface Test Passed 1. No action 006-0XX-XXXDiskette interface error 1. Diskette drive Cable 2. Diskette drive 3. System board 006-195-XXXDiskette interface Test aborted by 1. Information user 2. Re-start the test, if necessary 006-196-XXXDiskette interface test halt, error threshold exceeded 1. Press F3 to review the log file 2. Re-start the test to reset the log file 006-197-XXXDiskette interface test warning 1. If a component is called out, make sure it is connected and/or enabled 2. Re-run test 3. Component that is called out in warning statement 4. Component under test 006-198-XXXDiskette interface test aborted 1. If a component is called out, make sure it is connected and/or enabled 2. Flash the system and re-test 3. Go to the ″Undetermined problems″ section 006-199-XXXDiskette interface test failed, cause 1. Go to the ″Undetermined problems″ section unknown 2. Flash the system and re-test 3. Replace component under function test 006-25X-XXXDiskette interface Error 1. Diskette drive cable 2. Diskette drive 3. System board 011-000-XXXSerial port Interface Test Passed 1. No action 011-001-XXXSerial port Presence 1. Remove external serial device, if present 2. Run setup, enable port 3. System board 011-002-XXX 1. System board 011-003-XXXSerial port Timeout/Parity error Chapter 1. IBM PC Enhanced Diagnostics error codes 7