Lenovo NetVista Hardware Maintenance Manual for NetVista 6018, 6058, 6059, 626 - Page 92

Run Setup and verify PCI/ISA configuration

Page 92 highlights

POST Error Code 1207 13XX 1402Printer not ready 1403No paper error, or interrupt failure 1404System board timeout failure 1405Parallel adapter error 1406Presence test error 14XXNot listed above. Check printer before replacing system board 15XX 1692Boot sequence error 16XX 1762Hard disk drive configuration error 1780 (Disk Drive 0)1781 (Disk Drive 1)1782 (Disk Drive 2)1783 (Disk Drive 3) 180X, 188XPCI configuration or resource error 1962Boot sequence error 209X FRU/Action 1. Communications Cable 2. Dual Async Adapter/A 1. Game Adapter Information only Information only 1. Run Enhanced Diagnostics 1. Run Enhanced Diagnostics 1. Run Enhanced Diagnostics 1. Printer 2. System Board 1. SDLC Adapter 1. Run FDISK to ensure at least one active partition is set active 1. 36/38 Workstation Adapter 1. Run Configuration (See "Setup Utility program" on page 41) 1. See "Power supply" on page 30 2. Hard Disk Drive 3. System Board 4. Riser card 5. Hard Disk Cable 6. Power Supply 1. Run Setup and verify PCI/ISA configuration settings. 2. If necessary, set ISA adapters to Not available to allow PCI adapters to properly configure. 3. Remove any suspect ISA adapters. 4. Rerun diagnostics. 5. PCI Adapter 1. Possible hard disk drive problem; see "Hard disk drive boot error" on page 42 1. Diskette Drive 2. Diskette Cable 78 Hardware Maintenance Manual: IBM NetVista Computer Types 6058, 6059, 6269, 6568, 6569, 6578, 6579, 6648, 6649

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238
  • 239
  • 240
  • 241
  • 242
  • 243
  • 244
  • 245
  • 246
  • 247
  • 248

POST Error Code
FRU/Action
1207
1.
Communications Cable
2.
Dual Async Adapter/A
13XX
1.
Game Adapter
1402
Printer not ready
Information only
1403
No paper error, or interrupt failure
Information only
1404
System board timeout failure
1.
Run Enhanced Diagnostics
1405
Parallel adapter error
1.
Run Enhanced Diagnostics
1406
Presence test error
1.
Run Enhanced Diagnostics
14XX
Not listed above. Check printer before
replacing system board
1.
Printer
2.
System Board
15XX
1.
SDLC Adapter
1692
Boot sequence error
1.
Run FDISK to ensure at least one active
partition is set active
16XX
1.
36/38 Workstation Adapter
1762
Hard disk drive configuration error
1.
Run Configuration (See
Setup Utility
program
on page 41)
1780
(Disk Drive 0)
1781
(Disk Drive 1)
1782
(Disk
Drive 2)
1783
(Disk Drive 3)
1.
See
Power supply
on page 30
2.
Hard Disk Drive
3.
System Board
4.
Riser card
5.
Hard Disk Cable
6.
Power Supply
180X, 188X
PCI configuration or resource error
1.
Run Setup and verify PCI/ISA configuration
settings.
2.
If necessary, set ISA adapters to
Not available
to
allow PCI adapters to properly configure.
3.
Remove any suspect ISA adapters.
4.
Rerun diagnostics.
5.
PCI Adapter
1962
Boot sequence error
1.
Possible hard disk drive problem; see
Hard
disk drive boot error
on page 42
209X
1.
Diskette Drive
2.
Diskette Cable
78
Hardware Maintenance Manual: IBM NetVista Computer Types 6058, 6059, 6269, 6568, 6569, 6578, 6579, 6648,
6649