Lenovo NetVista Hardware Maintenance Manual (HMM) for NetVista 2284 systems - Page 138
System Board, System Board Installation
View all Lenovo NetVista manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 138 highlights
System Board • Remove all adapter cards. • Disconnect all cables connected to the system board. Note the location and orientation of all cables. • Remove the screws securing the system board to the chassis. • Lift the system board to remove from chassis. • Remove memory (DIMM) if applicable. • Remove processor if necessary. NOTE: System Board Installation • Before reinstallation, position the housing on its side. When installing a new system board, push the board to the rear and align it with the front locating pin. Visually verify that the board is aligned properly, then press the board down. • Be sure to reinstall the processor, DIMMs, I/O port bracket onto the new system board if applicable. • After installing the system board, secure with original screws. • Change all jumper settings to match those of the original board. • Reinstall other components into the machine i.e. drives, power supply, cables, etc. 104 IBM Desktop System HMM