Lenovo NetVista Hardware Maintenance Manual (HMM) for NetVista 2284 systems - Page 49
Changing Parameter Settings, In the Configuration/Setup Utility Menus,
View all Lenovo NetVista manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
The following table lists specific keys on the keyboard that will help you move through the Configuration/ Setup Utility Menus: Keys Down- or uparrow key Left- or rightarrow key F1 Esc Enter F10 F7 F5 Function Use these arrow keys to highlight an option on the menu. (Press the Enter key to choose the option.) Use these arrow keys to make a selection and change an option's setting. On some menus, you can use these keys to move from one field to another. Press this key if you want help for a selected menu option. After viewing or making changes to the settings on a menu, press this key to exit the menu. Press this key to choose a highlighted option from a menu Press this key if you want to save the current settings for a line Press this key if you want to load the factory default settings from the selected brackets. Press this key if you want to restore item previous setting Changing Parameter Settings In the Configuration/Setup Utility Menus, the configuration information that you can change is enclosed in brackets like these: [ ]. You cannot change any information that is not enclosed in brackets. Use the up- or down- arrow keys to highlight options then press Enter to display a menu. When changing the setting of a particular parameter, highlight the setting then use the left- or right- arrow key to change the setting. Refer to the Configuration/ Setup Utility help for details on the configurable parameters in each menu. General Information 15