Lenovo NetVista Hardware Maintenance Manual (HMM) for NetVista 2284 systems - Page 78

IBM Desktop System HMM, Table 2-2, BIOS Error Beeps List, POST Error Codes and Messages List

Page 78 highlights

Table 2-1 POST Error Codes and Messages List NOTE: To diagnose a problem, first find the BIOS error messages or codes in left column. If directed to a check procedure, replace the FRU indicated in the check procedure. If no check procedure is indicated, the first Action/FRU listed in right column is the most likely cause. BIOS Error Codes, Messages Keyboard Is Lock OutUnlock The Key Manufacturing POST loop BIOS ROM Checksum error-System Halted Memory Test Fail Action/FRU 1. Enter Configuration/ Setup Utility and load the default settings. 2. Keyboard 3. System board 1. Message only 1. Clear CMOS and reboot again. 2. BIOS ROM 3. System board 1. Enter Configuration/ Setup Utility and load the default settings. 2. Memory 3. System board. Table 2-2 BIOS Error Beeps List NOTE: To diagnose a problem, first find the BIOS error beeps in left column. If directed to a check procedure, replace the FRU indicated in the check procedure. If no check procedure is indicated, the first Action/FRU listed in right column is the most likely cause. BIOS Error Beeps (L:long beep, S:short beep) Action/FRU L-L.... (Repeatedly) System DRAM has error 1. Insert the memory modules in the DIMM sockets properly, then reboot the system. 2. Memory module. See "005 -" on page 65 to replace memory module. 3. System boar L-S-S Video has error 1. Video adapter card 2. System boar 44 IBM Desktop System HMM

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188

44
IBM Desktop System HMM
Table 2-2
BIOS Error Beeps List
NOTE:
To diagnose a problem, first find the BIOS error
beeps in left column. If directed to a check
procedure, replace the FRU indicated in the check
procedure. If no check procedure is indicated, the
first Action/FRU listed in right column is the most
likely cause.
Keyboard Is Lock Out-
Unlock The Key
1.
Enter Configuration/
Setup Utility and load the
default settings.
2. Keyboard
3.
System board
Manufacturing POST loop
1.
Message only
BIOS ROM Checksum
error-System Halted
1.
Clear CMOS and reboot
again.
2.
BIOS ROM
3.
System board
Memory Test Fail
1.
Enter Configuration/
Setup Utility and load the
default settings.
2. Memory
3.
System board.
BIOS Error Beeps
(L:long beep, S:short beep)
Action/FRU
L-L
....
(Repeatedly)
System DRAM has error
1.
Insert the memory
modules in the DIMM
sockets properly, then
reboot the system.
2.
Memory module. See
“005 -” on page 65 to
replace memory module.
3.
System boar
L-S-S
Video has error
1.
Video adapter card
2.
System boar
Table 2-1
POST Error Codes and Messages List
NOTE:
To diagnose a problem, first find the BIOS error
messages or codes in left column. If directed to a
check procedure, replace the FRU indicated in the
check procedure. If no check procedure is indicated,
the first Action/FRU listed in right column is the most
likely cause.
BIOS Error Codes,
Messages
Action/FRU