Lenovo NetVista Hardware Maintenance Manual (HMM) for NetVista 2284 systems - Page 40
Power Supply, Internal Cabling, Monitor Not included with some models
View all Lenovo NetVista manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Power Supply • PC-98 compatible 145W ATX power supply • Switchable high/low voltage selection Internal Cabling • Two 40-pin ribbon cables for hard disk drives and CD/DVD-ROM drive. • One 34-pin ribbon cable for AT diskette drive. • One 4-pin (2-wire) cable for hard disk drive light-emitting diode (LED). • One 3-pin (3-wire) cable for power light-emitting diode (LED). • One 2-pin (2-wire) cable for power switch. Monitor (Not included with some models) • Super Video Graphics Array (SVGA) monitor. • VESA power saving mode compliant. • Connector for a detachable grounded 3-wire power cord • 1.8-m (5.8-ft.) signal cable attached • Auto-sensing power input for 100 Vac to 240 Vac • 15" (13.7" viewable image size) monitor - 0.28-mm dot pitch - Automatic scanning horizontal frequencies from 30 KHz to 54 KHz or 30 KHz to 69 KHz (for Japan) - Vertical frequencies between 50 Hz and 120 Hz. - DDC2A/B or DDC1/2B+ support (for Japan) - OSD (On-Screen Display) menu (for Japan) • 17" (15.7" viewable image size) monitor - 0.28-mm or 0.27-mm dot pitch (for Japan) - Automatic scanning horizontal frequencies from 30 KHz to 69 KHz or 30 KHz to 72 KHz (for Japan) - Vertical frequencies between 50 Hz and 120 Hz. - DDC1/2B+ support and OSD (On-Screen Display) menu 6 IBM Desktop System HMM