Lenovo NetVista Hardware Maintenance Manual (HMM) for NetVista 2284 systems - Page 61

Automatic Power On, ACPI Suspend Type, Power On by PCI Card

Get Lenovo NetVista PDF manuals and user guides View all Lenovo NetVista manuals
Add to My Manuals
Save this manual to your list of manuals

Page 61 highlights

IRQ8 (RTC Alarm) The default is Enabled. IRQ9 (IRQ2 Redir) The default is Disabled. IRQ10 (Reserved) The default is Disabled. IRQ11 (Reserved) The default is Disabled. IRQ12 (PS/2 Mouse) The default is Enabled. IRQ13 (Coprocessor) The default is Enabled. Automatic Power On Power On by PCI Card This option allows the user to boot from the PCI device after the system is turned on. The default is Disabled. Modem Ring Resume This parameter enables or disables an input signal on the serial Ring Indicator (RI) line (an incoming call on the modem) to awaken the system from a soft off state. The default is Disabled. RTC Alarm Resume. When Enabled, you can set the date and time at which the RTC (real-time clock) alarm wakes the system from suspend mode. The default is Disabled. Date (Month) When RTC Alarm Resume is set to Disabled, it is not configurable. Resume Time (hh:mm:ss) When RTC Alarm Resume is set to Disabled, it is not configurable. Soft-Off by PWRBTW When the power button is pressed for more than 4 seconds, it forces the system to enter the Soft-Off state when the system has "hung". The default is set to Instant-Off. ACPI Suspend Type When ACPI mode is set to S1(POS), all the components are working normally, only the processor General Information 27

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
General Information
27
IRQ8 (RTC Alarm)
The default is Enabled.
IRQ9 (IRQ2 Redir)
The default is Disabled.
IRQ10 (Reserved)
The default is Disabled.
IRQ11 (Reserved)
The default is Disabled.
IRQ12 (PS/2 Mouse)
The default is Enabled.
IRQ13 (Coprocessor)
The default is Enabled.
Automatic Power On
Power On by PCI Card
This option allows the user to boot from the PCI
device after the system is turned on.
The default is
Disabled.
Modem Ring Resume
This parameter enables or disables an input signal on
the serial Ring Indicator (RI) line (an incoming call on
the modem) to awaken the system from a soft off
state.
The default is Disabled.
RTC Alarm Resume.
When Enabled, you can set the date and time at
which the RTC (real-time clock) alarm wakes the
system from suspend mode.
The default is Disabled.
Date (Month)
When RTC Alarm Resume is set to Disabled, it is not
configurable.
Resume Time (hh:mm:ss)
When RTC Alarm Resume is set to Disabled, it is not
configurable.
Soft-Off by PWRBTW
When the power button is pressed for more than 4
seconds, it forces the system to enter the Soft-Off
state when the system has “hung“.
The default is set
to Instant-Off.
ACPI Suspend Type
When ACPI mode is set to S1(POS), all the
components are working normally, only the processor