Lenovo NetVista Hardware Maintenance Manual (HMM) for NetVista 2284 systems - Page 74
IBM Desktop System HMM, Table 2-1, POST Error Codes and Messages List, System Disk And Press
View all Lenovo NetVista manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Table 2-1 POST Error Codes and Messages List NOTE: To diagnose a problem, first find the BIOS error messages or codes in left column. If directed to a check procedure, replace the FRU indicated in the check procedure. If no check procedure is indicated, the first Action/FRU listed in right column is the most likely cause. BIOS Error Codes, Messages Action/FRU Real Time Clock Error CMOS Battery Has Failed CMOS Checksum Error 1. Enter Configuration/ Setup Utility and load the default settings. 2. CMOS battery. 3. System board. Disk Boot Failure, Insert System Disk And Press Enter 1. Insert a bootable floppy disk into floppy drive. 2. Check if floppy drive fails. 3. Check if system board fails. Diskette Drives Or Types Mismatch Error-Run Setup 1. Enter Configuration/ Setup Utility to reconfigure the drive type correctly. Display Switch Is Set Incorrectly 1. Enter Configuration/ Setup Utility to reconfigure Video Setting. Display Type Has Changed Since Last Boot 1. Enter Configuration/ Setup Utility to configure new display type. 2. Adapter Card EISA Configuration Checksum Error Please Run EISA Configuration Utility 1. No ESIA slot available. EISA Configuration Is Not Complete Please Run EISA Configuration Utility 1. No ESIA slot available. 40 IBM Desktop System HMM