Lenovo ThinkPad 560E User's Guide for TP 560X - Page 128
Suspend or Hibernation Problems, Appendix A.
View all Lenovo ThinkPad 560E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 128 highlights
Solving Computer Problems Suspend or Hibernation Problems Problem The computer enters suspend mode automatically. Performance degrades when the computer gets hot during use. The computer enters suspend mode immediately after POST (the suspend lamp turns on). Error 19 appears and the computer immediately turns off. The computer does not return from suspend mode, or the suspend lamp stays on and the computer does not work. The LCD is blank after resuming. Action The computer enters suspend mode automatically when the processor temperature reaches a certain level. This is not a defect. The processor speed might decrease under the following conditions: Use in a hot environment High-powered processing that requires high-power consumption This is not a defect. Make sure that: The battery pack is charged. The operating temperature is within the acceptable range. Refer to Appendix A. If these items are correct, have the computer serviced. The battery pack power is getting low. Connect the AC Adapter to the computer, or replace the battery pack with a fully charged one. The computer automatically enters suspend or hibernation mode when the battery power is empty. Do one of the following: Replace the battery pack with a fully charged one and then press Fn. Connect the AC Adapter to the computer; then press Fn. Check if an external display was not connected before entering suspend mode. Do not disconnect the external monitor while the computer is in suspend mode or hibernation mode. If no external monitor is attached when the computer resumes, the LCD remains blank and the output is not displayed. This restriction does not depend on the resolution value. 114 IBM ThinkPad 560X User's Guide