Lenovo ThinkServer RD240 Hardware Maintenance Manual - Page 100

CAUTION, Hazardous moving parts. Keep fingers and other body parts away., system board.

Get Lenovo ThinkServer RD240 PDF manuals and user guides View all Lenovo ThinkServer RD240 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 100 highlights

CAUTION: Hazardous moving parts. Keep fingers and other body parts away. To remove the system fans, do the following: 1. Remove all media from the drives and turn off all attached devices and the server. Then, disconnect all power cords from electrical outlets and disconnect all cables that are connected to the server. 2. Remove the server cover. See Removing the server cover. 3. Remove the microprocessor fan duct. See Removing the microprocessor fan duct. 4. Remove the riser card assembly. See Removing the riser card assembly. 5. Disconnect the system fan cables from the system board. See Locating other connectors on the system board. 6. For each system fan, press it downward while holding the buckle 1 . Then, carefully lift the system fan straight up to remove it out of the chassis 2 . Note: Mind the system fan cables. Remove the cables from any clip before removing the system fans. Figure 64. Removing the system fans 88 ThinkServer RD240 Hardware Maintenance Manual

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
CAUTION:
Hazardous moving parts. Keep fingers and other body parts away.
To remove the system fans, do the following:
1. Remove all media from the drives and turn off all attached devices and the server. Then, disconnect all
power cords from electrical outlets and disconnect all cables that are connected to the server.
2. Remove the server cover. See Removing the server cover.
3. Remove the microprocessor fan duct. See Removing the microprocessor fan duct.
4. Remove the riser card assembly. See Removing the riser card assembly.
5. Disconnect the system fan cables from the system board. See Locating other connectors on the
system board.
6. For each system fan, press it downward while holding the buckle
1
. Then, carefully lift the system
fan straight up to remove it out of the chassis
2
.
Note:
Mind the system fan cables. Remove the cables from any clip before removing the system fans.
Figure 64. Removing the system fans
88
ThinkServer RD240 Hardware Maintenance Manual