Lenovo ThinkServer RD240 Hardware Maintenance Manual - Page 129
IPMI 2.0 Configuration, Sub-item, Option, Description, Intel VT-d Configuration
View all Lenovo ThinkServer RD240 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 129 highlights
Table 31. Submenus under the IPMI 2.0 Configuration (continued) Item Sub-item Option BMC Watch Dog Timer Action [Disabled]Reset SystemPower DownPower Cycle BMC Alert LED and Beep [Off]On FW key [0000000] Note: The settings in [ ] are the default settings in the Setup Utility program. Description Disable or enable the OS based dongle. If enabled, whenever any problems arising from the operation system, such as the system halted, the system management feature will take actions of Reset System, Power Down, or Power Cycle at the prompt of the dongle Timer. Turn on or turn off the BMC alert LED and beep. Table 32. Submenu under the Intel VT-d Configuration Item Option Intel VT-d Disabled[Enabled] Note: The settings in [ ] are the default settings in the Setup Utility program. Description Enable or disable the virtualization technology for I/O devices. Table 33. Submenus under the Remote Access Configuration Item Option Remote Access [Disabled]Enabled Note: The settings in [ ] are the default settings in the Setup Utility program. Description Enable or disable the serial port remote access. Table 34. Items under the PCIPnP menu Item Clear NVRAM [No]Yes Option Boots Graphic Adapter Priority [Auto]Onboard VGA LAN1 [Auto]EnabledDisabled Description If this option is set to Yes, that means to clear the NVRAM information when the system starts up. If this option is set to Auto, the external graphics card will be enabled firstly. If no external graphics card, the integrated graphics controller is automatically enabled. If this option is set to Onboard VGA, only the integrated graphics card is enabled. The Auto option means to automatically enable the integrated Ethernet controller 1. The Enabled option means to enable the integrated Ethernet controller 1. The Disabled option means to disable the integrated Ethernet controller 1. Chapter 9. Configuring the server 117