Lenovo ThinkServer RD240 Hardware Maintenance Manual - Page 11
Use 16 American Wire Gauge AWG or 1.3 mm, Technology Equipment.
![]() |
View all Lenovo ThinkServer RD240 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Statement 16 CAUTION: To reduce the risk of electric shock or energy hazards: • This equipment must be installed by trained service personnel in a restricted-access location, as defined by the NEC and the latest edition of IEC 60950, The Standard for Safety of Information Technology Equipment. • Connect the equipment to a reliably grounded safety extra low voltage (SELV) source. An SELV source is a secondary circuit that is designed so that normal and single fault conditions do not cause the voltages to exceed a safe level (60 V direct current). • The branch circuit overcurrent protection must be rated in accordance with local building codes. • Use 16 American Wire Gauge (AWG) or 1.3 mm2 copper conductor only, not exceeding 3 meters in length. • Torque the wiring-terminal screws to 12 inch-pounds (1.4 newton-meters). • Incorporate a readily available approved and rated disconnect device in the field wiring. Statement 17 CAUTION: This product contains a Class 1M laser. Do not view directly with optical instruments. Statement 18 CAUTION: Do not place any object on top of rack-mounted devices. Statement 19 CAUTION: Hazardous moving parts. Keep fingers and other body parts away. © Copyright Lenovo 2010, 2012 ix
![](/manual_guide/products/lenovo-thinkserver-rd240-hardware-maintenance-manual-4a3235b/11.png)