Lenovo ThinkServer RD240 Hardware Maintenance Manual - Page 76
ELP SAS RAID Adapter without a ThinkServer 8708ELP SAS RAID Adapter Battery attached.
![]() |
View all Lenovo ThinkServer RD240 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
6. Connect the mini SAS signal cables to the RAID controller and the backplane by doing the following: Note: Use the two 440 mm (17.32 inches) mini SAS signal cables. Figure 38. Connecting the mini SAS signal cable 1 Port 0-3 2 Port 4-7 a. For one mini SAS signal cable, connect one end to the ports 0-3 on the RAID controller. Then, connect the other end to the mini SAS signal connector 2 on the backplane. b. For the other mini SAS signal cable, connect one end to the ports 4-7 on the RAID controller. Then, connect the other end to the mini SAS signal connector 1 on the backplane. Figure 39. Mini SAS signal connectors on the backplane What to do next: • To work with another piece of hardware, go to the appropriate section. • To complete the installation, go to "Completing the parts replacement" on page 90. • To reduce fan noise, the user can manually change the fan speed mode when using a ThinkServer 8708ELP SAS RAID Adapter without a ThinkServer 8708ELP SAS RAID Adapter Battery attached. For 64 ThinkServer RD240 Hardware Maintenance Manual
![](/manual_guide/products/lenovo-thinkserver-rd240-hardware-maintenance-manual-4a3235b/76.png)