Lexmark MC2325 Users Guide PDF - Page 129
TCP/IP, Allow DHCP/BOOTP to update
View all Lexmark MC2325 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 129 highlights
Understanding the printer menus 129 Menu item Description PS SmartSwitch Off On* Set the printer to switch automatically to PS emulation when a print job requires it, regardless of the default printer language. Note: If PS SmartSwitch is off, then the printer does not examine incoming data and uses the default printer language specified in the Setup menu. Job Buffering Off On* Temporarily store jobs on the printer hard disk before printing. Notes: • This menu item appears only when a hard disk is installed. • This menu item appears only in some printer models. Mac Binary PS Auto* On Off Set the printer to process Macintosh binary PostScript print jobs. Notes: • On processes raw binary PostScript print jobs. • Off filters print jobs using the standard protocol. Energy Efficient Ethernet Off On* Reduce power consumption when the printer does not receive data from the Ethernet network. Note: An asterisk (*) next to a value indicates the factory default setting. TCP/IP Note: This menu appears only in network printers or printers attached to print servers. Menu item Description Set Hostname Set the current TCP/IP host name. Domain Name Set the domain name. Note: This menu item appears only in some printer models. Allow DHCP/BOOTP to update NTP server Off On* Allow the DHCP and BOOTP clients to update the NTP settings of the printer. Zero Configuration Name Specify a service name for the zero configuration network. Note: This menu item appears only in some printer models. Enable Auto IP Off On* Assign an IP address automatically. DNS Server Address Specify the current Domain Name System (DNS) server address. Backup DNS Server Address Specify the backup DNS server addresses. Backup DNS Server Address 2 Backup DNS Server Address 3 Note: An asterisk (*) next to a value indicates the factory default setting.