Lexmark X7500 Service Manual - Page 121
and the rear side simultaneously., Insert the ball of the cable assembly-scan
![]() |
UPC - 734646391306
View all Lexmark X7500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 121 highlights
4036-501 In replacing the cable assembly, scan, rear: Note: The replacement procedures for the cable assembly-scan is similar on the front side and the rear side. Therefore, only the rear side replacement is mentioned. Perform replacement on the front side in the same manner. Note: Replace the cable assembly-scan on either side; do not remove it on the front side and the rear side simultaneously. 10. Move the full rate carriage to the center. 11. Insert the ball of the cable assembly-scan, rear into the groove in the pulley-capstan, rear. DADF Repair Procedures 4-67
![](/manual_guide/products/lexmark-x7500-service-manual-060f644/121.png)
DADF Repair Procedures
4-67
4036-501
In replacing the cable assembly, scan, rear:
Note:
The replacement procedures for the cable assembly-scan is similar on the front
side and the rear side. Therefore, only the rear side replacement is mentioned. Perform
replacement on the front side in the same manner.
Note:
Replace the cable assembly-scan on either side; do not remove it on the front side
and the rear side simultaneously.
10.
Move the full rate carriage to the center.
11.
Insert the ball of the cable assembly-scan, rear into the groove in the pulley-capstan,
rear.