Lexmark X7500 Service Manual - Page 46

Scanner ADF failed, experienced a failure.

Get Lexmark X7500 - MFP - Option PDF manuals and user guides
UPC - 734646391306
View all Lexmark X7500 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 46 highlights

4036-501 Error number 52 Number of beeps LED pattern 5 Error message displayed to user interface Not enough memory Corrective action The memory DIMM was found, but not enough memory is present. Replace the memory DIMM. 61 6 62 6 64 6 Scanner communication fault Scanner ADF failed Scanner main unit failed Check the connection and condition of the 120 pin scanner cable. Replace as necessary. If problem persists, check scanner and repair as necessary. The DADF on the scanner failed. Check connection of the DADF cable to the scanner. Repair or replace the DADF as necessary. The flatbed scanner experienced a failure. Repair or replace scanner as necessary. 71 7 User interface failure A problem was detected with the user interface. Check the connection of the 120 pin scanner cable and user interface cables. If cables are okay, replace the user interface. If problem persists, replace MFD controller board. 2-6 Service Manual

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
2-6
Service Manual
4036-501
52
5
Not enough memory
The memory DIMM was
found, but not enough
memory is present.
Replace the memory
DIMM.
61
6
Scanner
communication fault
Check the connection
and condition of the
120 pin scanner cable.
Replace as necessary.
If problem persists,
check scanner and
repair as necessary.
62
6
Scanner ADF failed
The DADF on the
scanner failed. Check
connection of the DADF
cable to the scanner.
Repair or replace the
DADF as necessary.
64
6
Scanner main unit failed
The flatbed scanner
experienced a failure.
Repair or replace
scanner as necessary.
71
7
User interface failure
A problem was detected
with the user interface.
Check the connection
of the 120 pin scanner
cable and user interface
cables. If cables are
okay, replace the user
interface. If problem
persists, replace MFD
controller board.
Error
number
Number
of beeps
LED pattern
Error message
displayed to user
interface
Corrective action