Lexmark X7500 Service Manual - Page 57
Adjustments, DADF Assembly Height Adjustment
![]() |
UPC - 734646391306
View all Lexmark X7500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
4036-501 Adjustments DADF Assembly Height Adjustment Adjusts the height of the counterbalance to ensure correct paper feeds. To ensure the adjustment is correct, make sure the two projections of the lower frame touch the DADF platen glass slightly when the DADF assembly is shut under its own weight. Make sure there is no space between the DADF platen cushion and the platen glass when the DADF assembly is shut under its own weight. 1. Loosen the nuts on both sides of the counterbalance. 2. Adjust the height and the slope of the DADF assembly by turning the set screws. 3. Turn the set screw in the direction of A. The front side of the DADF is up and the rear side is down. 4. Turn the set screw in the direction of B. The front side of the DADF is down and the rear side is up. Note: After adjusting, tighten the nuts. DADF Repair Procedures 4-3
![](/manual_guide/products/lexmark-x7500-service-manual-060f644/57.png)