LiftMaster 61LM Owners Manual - Page 156
Wire-in Light Control Controls interior or
View all LiftMaster 61LM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 156 highlights
INSTALLATION AND OPERATION INSTRUCTIONS 1. Plug the Light Control receiver into a 120 Volt AC polarized outlet. NOTE: The plug contacts are designed for polarized outlets only. 2. Plug a light into the polarized receiver outlet. 3. TURN on the light. 4. TO TEST: Press and release the receiver actuator. Light should turn on. Press the remote control push button. Light should turn off. NOTE: If two or more light products are installed, receivers must be located at least 10 feet apart to prevent electronic interference. If receiver does not activate light, check to be sure: 1. Light is turned on. 2. Light and_ receiver are firmly plugged in. 3. There is power to outlet (check fuse box or circuit breakers). If remote control does not activate light, check to be sure: 1. Receiver and remote have matching code settings. 2. You are pressing the remote control push button selected to operate the Light Control (with Multi-Function remotes.) 3. Remote control battery has power. NOTE: Test light on the remote should glow when the push button is pressed. (Battery changing information is included in instructions packed with your transmitter.) ACCESSORIES Model 772CB Wire-in Light Control Controls interior or exterior lights. wires into electrical socket like a dimmer switch. 114A1321B Model 753CB Multi-Function Remote Control Controls garage door openers and Light Control Products. Model 771CB Screw-In Light Control Controls interior or exterior lights Screws into light socket.